X-Ray Table Pad
1" Comfort Foam

Standard Vinyl Covered X-Ray Table Pads are open cell (Non-Coated) foam pads with a standard or heavy duty vinyl cover. Seams are heat sealed for durability, cleanability, and contamination control. Standard Foam Table Pads with vinyl covers are designed to offer superior comfort and hygiene for patients. These pads feature an open cell foam substrate that ensures enhanced patient comfort while providing necessary support, making them ideal for situations where patients need to remain lying down for extended periods. The clear vinyl cover not only contributes to the durability of the pads but also significantly improves cleanability and contamination control, ensuring a higher standard of hygiene in medical settings. Available in five different sizes, these table pads can accommodate a variety of situations and patient needs, offering flexibility and adaptability in their use. Furthermore, the pads are latex-free, making them safe for patients with latex allergies, and they are reusable, providing a cost-effective solution for healthcare facilities. With their combination of comfort, support, and hygienic design, the Domico Med-Device Standard Foam Table Pads with Vinyl Covers are an excellent choice for enhancing patient care and operational efficiency in medical environments.

72" x 24" x 1" Standard Frost Vinyl - Item: 171-181

72" x 24" x 1" Heavy Duty Black Vinyl - Item: 171-20

78" x 26" x 1-1/4" Standard Frost Vinyl - Item: 172-182

78" x 26" x 1-1/4" Heavy Duty Black Vinyl - Item: 172-20

78" x 27" x 1-1/2" Standard Frost Vinyl - Item: 173-183

78" x 27" x 1-1/2" Heavy Duty Black Vinyl - Item: 173-20

42" x 21" x 1" Standard Frost Vinyl - Item: 174-184

42" x 21" x 1" Heavy Duty Black Vinyl - Item: 174-20

78" x 27" x 1" Standard Frost Vinyl - Item: 176-186

78" x 27" x 1" Heavy Duty Black Vinyl - Item: 176-20

Comfort Foam Table Pads

Modalities: General Positioning

Standard Vinyl Cover (-8): 8 mil Frost-colored vinyl cover for standard foam positioning devices. Heat-sealed to prevent fluid absorption/contamination. Not recommended for low KVP techniques as edges/seams may show.

Heavy Duty Vinyl Cover (-20): 20 mil Extremely durable blue vinyl cover for standard foam positioning devices. Heat-sealed to prevent fluid absorption/contamination. Not recommended for low KVP techniques as edges/seams may show.

Gromments: None

Clean: Easy with mild cleaner

Seams: Heat-sealed to prevent fluid from absorption/contamination. Seams may show in image if in field of view. Not recommended for low KVP techniques

Substrate: Open cell foam

Sterile: No

Latex Free: Yes

Single Use: No

Due to sanitary, health and safety reasons, this item is non-returnable.

Genuine Domico products are guaranteed for 30 days from the initial date of purchase for defects in material and workmanship.

Proudly made in the USA and sold by a Veteran Owned Small Business.

POSITIONING FOAM FEATURES

VINYL COVERED Sponges are made from high density, lightweight foam and covered in heavy gauge, reinforced vinyl. These premium positioning sponges help create extreme patient comfort during long procedures. Non-porous surface is easy to clean with 10% bleach solution or any hospital grade disinfectant wipe/spray. Sewn seams provide a fully sealed design that inhibits the growth of microorganisms, offering superior hygiene compared to hook & loop closures or zippers. Fluid resistant, fire retardant, antimicrobial, and anti-fungal offering superior bacterial protection. Latex Free. VINYL COVERED sponges are radiolucent but seams will show under X-Ray.

*********************************************************************************************************************

CLEANING AND CARE INSTRUCTIONS FOR FOAM PRODUCTS
(Coated & Closed Cell Foam Positioners/Table Pads and Vinyl Bolsters)

To ensure the proper care of your new COATED or CLOSED CELL sponges and/or COATED table pads, we recommend the following guidelines for cleaning, care, and storage.

TO CLEAN the surface of COATED and CLOSED CELL sponges and/or COATED table pads that have become dirty or dusty with normal use and storage, wash with cold water and a mild general purpose soap (409 spray, etc.).Avoid using detergent cleaners that contain hydrocarbon solvents like acetone or ammonia.
Avoid rigorous scrubbing, abrasive pads, or stiff brushes as they can damage the surface.

TO DISINFECT the surface of your COATED and CLOSED CELL sponges and/or COATED table pads that have become soiled with blood, bodily fluids, barium, betadine, or other fluids, we recommend the use of hospital approved disinfectant wipes or sprays. Allow manufacturer recommended drying time in between patients.
A 10% Bleach solution can be used as a disinfectant if manufacture's guidelines are strictly followed. Failure to comply with these guidelines will result in a void of warranty.
Do NOT autoclave, steam, soak, launder or submerge in water.

CARE & WARRANTY covers foam products designed to provide aid to technologist when positioning a patient, and comfort for the patient during imaging procedures. The surface provides a barrier that can be cleaned between patients.
If your COATED foam product is punctured or torn, this barrier does not provide a barrier of protection for infection control and should be taken out of service immediately and replaced. This does NOT apply to CLOSED CELL foam products as the crosslink polyethylene foam is non-porous and resistant to fluid even if punctured or torn.
Because of the nature of foam products, there is a 30 day manufacturing warranty on sponges and/or table pads to be free from defects in material and workmanship under normal use. Warranty does not cover damage from misuse, mis-handling or neglect.
STORE sponges in a clean dry area when not in use. Table Pads should be kept on a flat surface to prevent creases or hung on a table rack pad.

Have a Question: Call us at (800) 225-4805 or email us [email protected]