|
|
|
|
Exclusive Spinal Leak Foam Positioning Wedge to facilitate the important advances in imaging spinal CSF fluid leaks. Manufactured with 2# Polyethylene crosslink closed cell Charcoal foam. Easy to clean with medical grade disinfectant or 10% bleach solution. 15 degree slope with round transition edge makes positioning comfortable for the patient.
Neuro Spine Positioner - 15 Degree Slope, Closed Cell Positioning Sponge
54"L x 16"W x 6.55"H
Closed Cell Sponges are made from a lightweight, radiolucent, non-porous foam. These positioning sponges are entirely fluid resistant, easy to clean and extremely durable! Featured in a non-coated, premium charcoal grey color.
CLOSED CELL crosslink polyethylene foam is non-porous, radiolucent, and easy to clean. They are manufactured using a fine micro-cellular structure that is characterized by its firm feel and its resistance to fluids. It has a higher tensile and tear strength compared to most foam products on the market. It is ozone resistant and impervious to mildew, mold, rot, and bacteria. They are nontoxic, antimicrobial, anti-bacterial, and anti-fungal. Our closed cell sponges make the best positioning aides and are manufactured right here in the USA.
100% Radiolucent for artifact free imaging
Cleanable, fluid resistant surface
Lightweight and comfortable
Returns of this item can be made within ten (10) business days from delivery. Returns must be unopened and in original packaging.
All genuine Z&Z products are guaranteed for 30 days from the initial date of purchase for defects in material and workmanship.
Proudly made in the USA and sold by a Veteran Owned Small Business.
CLEANING & CARE INSTRUCTIONS FOR (COATED POSITIONERS & TABLE PADS) & (CLOSED CELL POSITIONERS)
To ensure the proper care of your new coated or closed cell sponges and/or coated table pads, we recommend the following guidelines for cleaning, care, and storage.
CLEANING:
TO CLEAN the surface of coated and closed cell sponges and/or coated table pads that have become dirty or dusty with normal use and storage, wash with cold water and a mild general purpose soap (409 spray, etc.).
Avoid using detergent cleaners that contain hydrocarbon solvents like acetone or ammonia.
Avoid rigorous scrubbing, abrasive pads, or stiff brushes as they can damage the surface.
TO DISINFECT the surface of your coated and closed cell sponges and/or coated table pads that have become soiled with blood, bodily fluids, barium, betadine, or other fluids, we recommend the use of hospital approved disinfectant wipes or sprays. Allow manufacturer’s recommended drying time in between patients.
A 10% Bleach solution can be used as a disinfectant if manufacture’s guidelines are strictly followed. Failure to comply with these guidelines will result in a void of warranty.
Do NOT autoclave, steam, soak, launder or submerge in water.
CARE & WARRANTY:
Z&Z Medical foam products are designed to provide aid to technologist when positioning a patient, and comfort for the patient during imaging procedures. The surface provides a barrier that can be cleaned in between patients. If your coated foam product is punctured or torn, this barrier does not provide a barrier of protection for infection control and should be taken out of service immediately and replaced. This does NOT apply to closed cell foam products as the crosslink polyethylene foam is non-porous and resistant to fluid even if punctured or torn.
Because of the nature of foam products, there is a 30 day manufacturing warranty on sponges and/or table pads to be free from defects in material and workmanship under normal use. Warranty does not cover damage from misuse, mis-handling or neglect.
STORAGE:
Store sponges in a clean dry area when not in use.
Table pads should be kept on a flat surface to prevent creases.
Have a Question: Call us at (800) 225-4805 or email us sales@colortrieve.com
|
|
|
|
|
|
|
|
|