X-Ray Transfer Table Pad
1" Comfort Foam

Transfer Table Pads are manufactured to transfer patients horizontally from a gurney to the imaging table and provide a comfortable table pad that can be left in place during the imaging procedure. These pads are manufactured with a navy reinforced heavy gauge medical grade Brun-Tuff VCP vinyl that is twice as thick as regular table pads. These pads come with 8 reinforced lifting handles (4 on each side) that have a 2" polypropelene rubber grip for a more comfortable grip. This low friction vinyl is supple and slick enough to allow easy transfer between surfaces. Two eyelets are placed on each end to make this pad easy to hang when not in use. Pad cleans easily with 10% bleach solution or any medical grade hospital disinfectant.

Because of the thicker heavy guage vinyl material used, a "moire" pattern and the reinforced triple sewn edges may be seen in the image if used for x-ray. This moire appearance is expected due to the thicker, reinforced vinyl material that is required to secure the lifting handles. While the moiré pattern may be visible on X-ray, it does not affect the pad's radiolucency or performance.

Two Sizes. 1.8# polyurethane foam 60 ILD

72" x 24" x 1" - Item: TPAD-2472

80" x 30" x 1" - Item: TPAD-3080

Side Grips:

Transfer pads come with 8 Soft rubber grip handles that are conveniently spaced for two health care professionals to be able to stand on one side of the pad to transfer a patient from one surface to another.

Low friction—easy to slide between surfaces

High Tensile Strength, High Tear Strength

Waterproof, Stain proof and Flame Retardant

Antimicrobial, Mildew Resistant, UV resistant

Mesh laminated reinforced vinyl

4 Heavy duty transfer handles on each side

Table Pad is non-returnable due to sanitary, health, and safety reasons. A moire pattern will be visible in x-rays due to the thicker, reinforced vinyl required to secure the lifting handles.

Genuine Z&Z Medical products are guaranteed for one (1) year from the initial date of purchase for defects in material and workmanship.

Proudly made in the USA and sold by a Veteran Owned Small Business.

POSITIONING FOAM FEATURES

VINYL COVERED Sponges are made from high density, lightweight foam and covered in heavy gauge, reinforced vinyl. These premium positioning sponges help create extreme patient comfort during long procedures. Non-porous surface is easy to clean with 10% bleach solution or any hospital grade disinfectant wipe/spray. Sewn seams provide a fully sealed design that inhibits the growth of microorganisms, offering superior hygiene compared to hook & loop closures or zippers. Fluid resistant, fire retardant, antimicrobial, and anti-fungal offering superior bacterial protection. Latex Free. VINYL COVERED sponges are radiolucent but seams will show under X-Ray.

*********************************************************************************************************************

CLEANING AND CARE INSTRUCTIONS FOR FOAM PRODUCTS
(Coated & Closed Cell Foam Positioners/Table Pads and Vinyl Bolsters)

To ensure the proper care of your new COATED or CLOSED CELL sponges and/or COATED table pads, we recommend the following guidelines for cleaning, care, and storage.

TO CLEAN the surface of COATED and CLOSED CELL sponges and/or COATED table pads that have become dirty or dusty with normal use and storage, wash with cold water and a mild general purpose soap (409 spray, etc.).Avoid using detergent cleaners that contain hydrocarbon solvents like acetone or ammonia.
Avoid rigorous scrubbing, abrasive pads, or stiff brushes as they can damage the surface.

TO DISINFECT the surface of your COATED and CLOSED CELL sponges and/or COATED table pads that have become soiled with blood, bodily fluids, barium, betadine, or other fluids, we recommend the use of hospital approved disinfectant wipes or sprays. Allow manufacturer recommended drying time in between patients.
A 10% Bleach solution can be used as a disinfectant if manufacture's guidelines are strictly followed. Failure to comply with these guidelines will result in a void of warranty.
Do NOT autoclave, steam, soak, launder or submerge in water.

CARE & WARRANTY covers foam products designed to provide aid to technologist when positioning a patient, and comfort for the patient during imaging procedures. The surface provides a barrier that can be cleaned between patients.
If your COATED foam product is punctured or torn, this barrier does not provide a barrier of protection for infection control and should be taken out of service immediately and replaced. This does NOT apply to CLOSED CELL foam products as the crosslink polyethylene foam is non-porous and resistant to fluid even if punctured or torn.
Because of the nature of foam products, there is a 30 day manufacturing warranty on sponges and/or table pads to be free from defects in material and workmanship under normal use. Warranty does not cover damage from misuse, mis-handling or neglect.
STORE sponges in a clean dry area when not in use. Table Pads should be kept on a flat surface to prevent creases or hung on a table rack pad.

Have a Question: Call us at (800) 225-4805 or Email us [email protected]